|
Hose Clip 16mm- 27mm used on heater hoses and the by pass hose. This is worm drive type clip and is used to replace the wire type clips CS4016 as sho...
|
|
|
|
Price: GBP1.07
|
 |
|
|
|
Wide Zinc plated hose clip for large Radiator hoses.
Formerly GHC 913 and recommended in place of wire clip CS4027
...
|
|
|
|
Price: GBP1.35
|
|
|
|
|
Kit of Hose Clips to fit Mk2 Hose Kit.
Comprises items shown separately in this site as follows
CJ600101 x 2 pieces
CJ3014 x 8 pieces
GHC225040M...
|
|
|
|
Price: GBP8.22
|
|
|
|
|
Reinforced coolant heater out hose for Air conditioned models.
...
|
|
|
|
Price: GBP3.43
|
|
|
|
|
Reinforced Hose that connects bulkhead heater spigot to long return pipe.
Please note we usually remove the label.
[ Included in kit GRH001K ]
...
|
|
|
|
Price: GBP6.56
|
|
|
|
|
Hose to connect Radiator with Reservoir Bottle. High quality Gates brand.
This hose is 8mm internally and supplied in a 40cm length to cut to suit ...
|
|
|
Price: GBP2.57
|
|
|
|
|
Short piece of hose between Clutch Master Reservoir and Master Cylinder.
...
|
|
|
|
Price: GBP1.31
|
|
|
|
|
Hot air or preheat hose in original material....
|
|
|
|
Price: GBP23.89
|
|
|
|
|
Screw for mounting ignition module to base plates No 10 x 1/4UNF
Not normally required as the existing screws are used, or the module is supplied alr...
|
|
|
|
Price: GBP1.72
|
|
|
|
|
No VAT to pay
Kit of two front and two rear Payen Inlet Manifold gaskets. Acknowledged as the best gasket brand for this application.
The function of these gas...
|
|
|
|
Price: GBP39.56
|
|
|
|
|
Inlet Manifold Long Bolt in Bright Zinc Plate.
5/16 UNC Bolt 3 inches long.
Made to British Standard BS1768 Grade 5 High Tensile Steel.
Use wit...
|
|
|
|
Price: GBP0.71
|
|
|
|
![Inlet Manifold Short Set Screw UNC [aka SH505081] HU858](shopthumbs/246.jpg)
|
Set Screw, the short ones, used to fit inlet manifolds, being 5/16 UNC x 1 inch Zinc plated High tensile steel. Also this is the bottom thernostat ...
|
|
|
|
Price: GBP0.55
|
|
|
|
